-
平臺編號：bio-73516
-
國際編號：ATCC CRL-5843
-
細胞信息： NCI-H835
-
規格：Frozen
-
用途：ATCC 原裝進口
-
服務費用：
加載中…… - 訂購
-
注意事項：僅用于科學研究或者工業應用等非醫療目的不可用于人類或動物的臨床診斷或治療，非藥用，非食用（產品信息以出庫為準）
NCI-H835
NCI-H835 [H835]
CRL-5843 ™
Product category
Human cells
Organism
Homo sapiens, human
Morphology
floating aggregates of round cell clusters
Tissue
Lung
Disease
Carcinoid
Applications
3D cell culture
Cancer research
Product format
Frozen
Storage conditions
Vapor phase of liquid nitrogen
Characteristics
Growth properties
Suspension
Derivation
The line was established in October 1984.
Age
48 years
Ethnicity
Black
Gender
Female
Clinical data
The tissue donor was a non-smoker.
Karyotype
del(p13-pter)
Comments
The tissue donor was a non-smoker.
Handling information
Unpacking and storage instructions
Check all containers for leakage or breakage.
Remove the frozen cells from the dry ice packaging and immediately place the cells at a temperature below -130°C, preferably in liquid nitrogen vapor, until ready for use.
Complete medium
The base medium for this cell line is ATCC-formulated RPMI-1640 Medium, Catalog No. 30-2001.To make the complete growth medium, add the following components to the base medium: fetal bovine serum to a final concentration of 5%
Temperature
37°C
Atmosphere
95% Air, 5% CO2
Handling procedure
To insure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at –70°C. Storage at –70°C will result in loss of viability.
Thaw the vial by gentle agitation in a 37°C water bath. To reduce the possibility of contamination, keep the O-ring and cap out of the water. Thawing should be rapid (approximately 2 minutes).
Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
Transfer the vial contents to a centrifuge tube containing 9.0 mL complete growth medium and spin at approximately 125 x g for 5 to 7 minutes. Discard supernatant.
Resuspend the cell pellet with the recommended complete growth medium (see the specific batch information for the culture recommended dilution ratio) and dispense into a 25 cm2 or a 75 cm2 culture flask. It is important to avoid excessive alkalinity of the medium during recovery of the cells. It is suggested that, prior to the addition of the vial contents, the culture vessel containing the complete growth medium be placed into the incubator for at least 15 minutes to allow the medium to reach its normal pH (7.0 to 7.6).
Incubate the culture at 37°C in a suitable incubator. A 5% CO2 in air atmosphere is recommended if using the medium described on this product sheet.
Subculturing procedure
Cultures can be maintained by the addition of fresh medium or replacement of medium. Alternatively, cultures can be established by centrifugation with subsequent resuspension in fresh medium. Cultures grow as floating aggregates of round cell clusters.
Medium Renewal: Add medium as cell density increases.
Reagents for cryopreservation
Fetal bovine serum supplemented with 10% (v/v) DMSO (ATCC 4-X)
Quality control specifications
History
Legal disclaimers
