-
平臺編號：bio-137983
-
國際編號：ATCC 27095
-
拉丁屬名： Mycoplasma hyosynoviae
-
規格：Freeze-dried
-
用途：ATCC 原裝進口
-
服務費用：
加載中…… - 訂購 說明書
-
注意事項：僅用于科學研究或者工業應用等非醫療目的不可用于人類或動物的臨床診斷或治療，非藥用，非食用（產品信息以出庫為準）
豬滑液支原體
Mycoplasma hyosynoviae Ross and Karmon 拉丁名
ATCC 27095 編號
Product category Bacteria
Strain designation 別名 [M60]
Type strain 模式菌株 No
Isolation 分離源 source Lung from pig with catarrhal pneumonia
Product format 提供形式 Freeze-dried
PreceptrolNo
Medium 培養基 ATCC Medium 243: Mycoplasma medium
Temperature 培養溫度 37°C
Atmosphere 需氧情況 95% Air, 5% CO2
Handling procedure1. Follow instructions as suggested for the culturing of Mollicutes:
PROCEDURES FOR PROPAGATING MOLLICUTES:
a) Open the vial according to the enclosed instructions.
b) Using a Pasteur or 1.0 ml pipette, withdraw approximately 0.5 to 1.0 ml from a tube containing 5.0 ml of #243. Rehydrate the entire pellet.
c) Aseptically transfer this aliquot back into the tube. Mix well.
d) Make serial dilutions by transferring 0.5 ml from the original tube to a tube containing 4.5 ml. Repeat process by transferring 0.5 ml from the second to a third tube, etc. Dilutions are important, not only for titration purposes, but also to keep culture in varying stages of growth. Many strains will die out rapidly once acid or alkaline conditions are reached. It is recommended to prepare several dilutions from the initial tube as the cryoprotectant used in the freeze?drying process often inhibits growth.
e) Use an uninoculated tube of broth to serve as a control.
f) Plates may be inoculated to check colonial morphology. You can also spot each dilution on the surface of plate (4 or more/plate) to determine the number of colony-forming units. However, not all strains do well on solid medium.
g) Incubate all tubes and plates under the recommended conditions and appropriate temperature. The time necessary for growth will vary from strain to strain. Growth on plates generally requires additional incubation.
h) Depending on the medium used, growth will be indicated by increased turbidity, a color change, or both.
2. This strain starts to show turbidity in the first few dilution tubes after 24 to 48 hours. Additional incubation is required for growth on solid agar. Subsequent, fresh transfers grow more rapidly than the original culture. This strain produces moderate turbidity.
Handling notesColonies on #243 agar plates are entire, circular, smooth, and typical ?fried egg? morphology.
